Partition Magic Software Partition magic software for Windows Server 2000/2003/2008/2008 R2/2012/2012 R2, Windows XP/Vista/7/8/8.1/10, etc.
Set active
- If you have several primary partitions, you must specify one to be the boot partition. For this, one partition can be set as active. As a rule, a disk can have only one active partition.
-
- To set an active partition:
- 1. Select a primary partition to set as active from the list in the main window of EASEUS Partition Master.
- 2. Select Partitions > Advanced>Set Active.
- 3. By clicking OK, you will add the pending operation of setting active partition.
-
- Attention:
- Before you make a partition active, you must make sure it is formatted and contains an operating system. Otherwise your PC cannot boot from this partition!
-
- If you set a partition as active and there was another active partition on the disk, it will be unset automatically. This might also prevent your PC from booting.
Using EASEUS Partition Master
- EASEUS Partition Master basic
Copyright (C) 2018 www.partition-magic.com, All Rights Reserved. PartitionMagic ® is a registered trademark of Symantec Corporation.